TG560
118.00 MHz…136.975MHz, 8.33/25 kHz channel spacing with integrated power supply carrier power >20W, optionally extended frequency range 118-156 MHz, available on request.
GS-5910
The BECKER GS 5910 Ground Station is designed for operation in civil and military control towers, air traffic control centers, control shelters or on ships. The GS 5910 is equipped with a receiver guard channel scan mode.
The frequency range extends from 108 to 144 MHz VHF in 25 kHz / 12.5 kHz, or 8.33 kHz channel spacing. The channel spacing is given by the frequency. The equipment automatically switches to the right selectivity and audio frequency bandwidth.
Up to 98 preset channels are available which can be programmed by the operator. To each channel the output power (high or low), the squelch threshold level and offset frequency can be stored. The guard frequency is stored in the 99th channel at any desired value.
In addition to microphone and headphones connectors, speaker and radio status indicators, the operator’s control interface is composed of a keyboard and a 4- lines / 20- characters-per-line LCD, operated in "menus" oriented mode.
In addition, the transceiver is provided with a serial data link and the required input/output signals for total remote control. The rear panel has separate RF connectors for transmitter and receiver section, and also a location for a coaxial relay, allowing the use of one common T/R antenna, or separate T and R antennas according the installation.
The transceiver, is 19" wide and 3U high, and can be supplied in rack mounting or desk version.
Two power supplies are available: 24 V DC voltages and 85- 265 V AC mains voltage.
GS-5930
The BECKER GS 5930 Ground Station is designed for operation in civil and military control towers, air traffic control centers, control shelters or on ships. The GS 5930 is equipped with a receiver guard channel scan mode.
The frequency range extends from 225 to 400 MHz UHF in 25 kHz / 12.5 kHz, or 8 channel spacing. The channel spacing is given by the frequency. The equipment automatically switches to the right selectivity and audio frequency bandwidth.
Up to 99 preset channels are available which can be programmed by the operator. To each channel the output power (high or low), the squelch threshold level and offset frequency can be stored.
In addition to microphone and headphones connectors, speaker and radio status indicators, the operator’s control interface is composed of a keyboard and a 4- lines / 20- characters-per-line LCD, operated in "menus" oriented mode.
In addition, the transceiver is provided with a serial data link and the required input/output signals for total remote control. The rear panel has separate RF connectors for transmitter and receiver section, and also a location for a coaxial relay, allowing the use of one common T/R antenna, or separate T and R antennas according the installation.
The transceiver, is 19" wide and 3U high, and can be supplied in rack mounting or desk version.
Two power supplies are available: 24 V DC voltages and 85- 265 V AC mains voltage.
